Datasheet4U Logo Datasheet4U.com

MAX8940 - 120mA Linear Regulator

Description

The MAX8940 low-noise, low-dropout (LDO) linear regulator is designed to deliver up to 120mA continuous output current.

This regulator achieves a low 120mV dropout for 120mA load current.

Features

  • Space-Saving SC70.
  • 25µVRMS Output Noise at 100Hz to 100kHz Bandwidth.
  • 65dB PSRR at 10kHz 120mV Dropout at 120mA Load Stable with 1µF Ceramic Capacitor for Any Load Guaranteed 120mA Output Output Voltages: 2.8V or 3V MAX8940.
  • Low 40µA Ground Current.
  • Excellent Load/Line Transient.
  • Overcurrent and Thermal Protection.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX894L High-Side P-Channel Switches Maxim
MAX8903C 2A 1-Cell Li+ DC-DC Charger Maxim Integrated
MAX8903D 2A 1-Cell Li+ DC-DC Charger Maxim Integrated
MAX8903E 2A 1-Cell Li+ DC-DC Charger Maxim Integrated
MAX8903G 2A 1-Cell Li+ DC-DC Charger Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX8900A 1.2A Switch-Mode Li+ Chargers
MAX8900B 1.2A Switch-Mode Li+ Chargers
MAX8900C 1.2A Switch-Mode Li+ Chargers
MAX8901A Highest Efficiency Supply
MAX8901B Highest Efficiency Supply

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-4662; Rev 0; 6/09 www.DataSheet4U.com Low-Noise, High PSRR, Low-Dropout, 120mA Linear Regulator General Description The MAX8940 low-noise, low-dropout (LDO) linear regulator is designed to deliver up to 120mA continuous output current. This regulator achieves a low 120mV dropout for 120mA load current. The MAX8940 uses an advanced architecture to achieve low output voltage noise of 25µVRMS and PSRR of 45dB at 100kHz. The MAX8940 is preset to either 2.8V or 3.0V. Designed with a p-channel MOSFET series pass transistor, the MAX8940 maintain very low ground current (40µA). The regulator is designed and optimized to work with lowvalue, low-cost ceramic capacitors. The MAX8940 requires only 1µF (typ) of output capacitance for stability with any load.
Published: |